Firmware updates

Technical forum for the hugely popular Hikvison IP range
Posts: 1
Joined: Fri Dec 30, 2016 7:13 pm

Re: Firmware updates

Postby kentyang » Mon Jun 19, 2017 5:02 pm

Hi Adam,

I am totally new to this, can you please check if I have to update my DVR

Model: DS-7204HGHI-F1
Version: V.3.4.1_160422

Thank you.

Posts: 3
Joined: Wed May 17, 2017 7:46 pm

Re: Firmware updates

Postby rasmus » Mon Jun 26, 2017 1:16 pm

rasmus wrote:
Wed May 17, 2017 7:52 pm

I have two DS-2CD2142FWD-IS UK version with V5.4.1 build 160525. They are working properly.

I tried to upgrade to:
a) The nearest version (5.4.3) : ... C%205MP%29
b) The latest version (5.4.5): ... %2C1X41%29

In both cases: I get the message "upgrade failed". I tried both the Safari plugin on OSX as well as the IVM-4200 software.

Am I doing something wrong? Many thanks for your reply.
I could still use some help with this....

Posts: 2
Joined: Thu Sep 07, 2017 9:28 am

Re: Firmware updates

Postby Stip1973 » Thu Sep 07, 2017 9:52 am


I have a Hikvision NVR DS-7308NI-SE/P with firmware V2.3.7 build 131112.
I now updated it to V3.0.15 build 151230.
I thought that this was the latest version, and that I would have the line crossing and intrution detection. This is not the case.
Is there a newer version? And where can I download it?
Do I also have to update the cameras?
Is the line crossing in the firmware of the NVR, or is it in the firmware of the camera?
I use the DS-2CD2432F-IW-4 cubecamera.

All help is much appriciated. ;)

Posts: 2
Joined: Thu Sep 07, 2017 9:28 am

Re: Firmware updates

Postby Stip1973 » Thu Sep 07, 2017 10:07 am


It is of course a NVR DS-7608NI-SE/P instead of a DS-7308NI-SE/P.


Site Admin
Posts: 130
Joined: Thu Jul 14, 2016 2:50 pm

Re: Firmware updates

Postby adam » Fri Sep 08, 2017 12:48 pm

Virtual host is in the web interface under network > advanced.

If it fails double check the firmware/try a previous version between the latest and your current firmware.

Posts: 3
Joined: Mon Sep 11, 2017 11:27 am
Location: Ho Chi Minh City

Re: Firmware updates

Postby kamara » Mon Sep 11, 2017 11:37 am

Thanks for information, Let me ask for a firmware update guide document supplying & distributing security equipment of HIKVISION and installation of CCTV in Ho Chi Minh

Posts: 18
Joined: Wed Aug 16, 2017 2:16 pm

Re: Firmware updates

Postby Maxim » Wed Sep 13, 2017 5:20 pm

I recently updated the firmware on my DS-7732NI-I4/16P NVR from V3.3.9 Build 160612 to V3.4.92 and it all appeared well it rebooted and presented a "Password" screen where it asked for my old password and then to enter a new password and verify the new password.
I entered my old password and it wouldn't accept it. I tried the old "12345" that didn't work.
From what I have since found it appears you need a special software tool that uses the devices serial number to reset the password.
Can anyone HELP PLEASE??? :?: .

Who is online

Users browsing this forum: No registered users and 1 guest