H265+ on NVR

Technical forum for the hugely popular Hikvison IP range
rickwookie
Posts: 3
Joined: Sun Sep 03, 2017 4:15 pm

H265+ on NVR

Postby rickwookie » Sun Sep 03, 2017 8:15 pm

What's the status of H265+ recording on K and I series NVRs? All the new EasyIP 3 cameras support it, but when I check the datasheets for the NVRs, none of them list it. The odd thing is, if I look at the details of the NVRs on the US Hikvision site the DO list H265+ support.

Is it just a case of waiting for the firmware to be updated to add support, and if so which NVRs will support it and when?

Maxim
Posts: 14
Joined: Wed Aug 16, 2017 2:16 pm

Re: H265+ on NVR

Postby Maxim » Tue Sep 05, 2017 4:19 pm

Similar here in Australia.
I can only speak for the 7700 I series. Whilst I am waiting on replies from a couple avenues about upgrading my firmware which according to Hikvisions local website there is no update and yet the www.hikvision.com/en has two more recent versions.
My Firmware is Ver 3.3.9 Build 160612. (12th June 2016?)
On my NVR software there is a checkbox labelled "Enable H265 (For initial access)".
In the (softcopy) manual that came with the NVR it speaks only of H.265.
So in Australia, the data sheet, the NVR manual and the NVR software only speak of H.265, no mention of H.265+
As to when it is coming I can only guess or hope (this year?)

rickwookie
Posts: 3
Joined: Sun Sep 03, 2017 4:15 pm

Re: H265+ on NVR

Postby rickwookie » Wed Sep 06, 2017 10:51 am

Only on the North American site can I find reference to support for H265+...

http://www.hikvision.com/us/Products_1_ ... 32623.html
Maxim wrote:
Tue Sep 05, 2017 4:19 pm
Similar here in Australia.
I can only speak for the 7700 I series. Whilst I am waiting on replies from a couple avenues about upgrading my firmware which according to Hikvisions local website there is no update and yet the www.hikvision.com/en has two more recent versions.
My Firmware is Ver 3.3.9 Build 160612. (12th June 2016?)
On my NVR software there is a checkbox labelled "Enable H265 (For initial access)".
In the (softcopy) manual that came with the NVR it speaks only of H.265.
So in Australia, the data sheet, the NVR manual and the NVR software only speak of H.265, no mention of H.265+
As to when it is coming I can only guess or hope (this year?)
We have V3.4.95 here in the UK. I can't imagine anything pre 2017 would have support for H265+.

Maxim
Posts: 14
Joined: Wed Aug 16, 2017 2:16 pm

Re: H265+ on NVR

Postby Maxim » Sun Sep 10, 2017 11:37 am

Yes, Unfortunately on the Hik site here in Australia there is no more recent firmware than the version I have. (Support?? what's that).
I have been tempted to use one of the later versions from the U.K. site but they warn about being region specific so I don't want to "Brick" my NVR.
I just looked on http://www.hikvision.co.uk and see that version V3.4.95 you spoke of, that means there are three more recent versions of firmware than what I have.
I would have been better off buying a U.K. system and getting support from the same.


Who is online

Users browsing this forum: No registered users and 8 guests