Cloud storage mode enable

Including important information as to why you should only buy from an authorized Hikvision reseller
Post Reply
hpathum
Posts: 5
Joined: Thu May 20, 2021 12:29 pm

Cloud storage mode enable

Post by hpathum »

I am using Hikvision NVR "Model - DS-7616NI-K2" and also my firmware version is “V3.4.101 build 180904”. Therefore I want to enable cloud storage mode, but unfortunately, that function is not available for this device, could you please advise whether that feature is support or not.

hpathum
Posts: 5
Joined: Thu May 20, 2021 12:29 pm

Re: Cloud storage mode enable

Post by hpathum »

Could you please help with this configuraion. I am getting struck .

Chris CCTVKits
Posts: 12
Joined: Tue Apr 06, 2021 3:02 pm

Re: Cloud storage mode enable

Post by Chris CCTVKits »

Hi, have you checked whether the firmware that is on the NVR is the latest if it is not on the latest firmware here is the link to check the firmware and update if necessary http://www.hikvisioneurope.com/uk/porta ... 00NI-G2%5D

hpathum
Posts: 5
Joined: Thu May 20, 2021 12:29 pm

Re: Cloud storage mode enable

Post by hpathum »

Hi
My current version is "V3.4.101" therefore when I check the update it says "this is a higher version". then how can I installed it manually.

Chris CCTVKits
Posts: 12
Joined: Tue Apr 06, 2021 3:02 pm

Re: Cloud storage mode enable

Post by Chris CCTVKits »

Upgrading Hikvision DVR/NVR Firmware

To upgrade the firmware of a Hikvision DVR or NVR, please follow the steps below:

Insert a USB flash drive into the computer’s USB port (Please note that the USB flash drive does not need to be empty; it may contain other files and documents).
Locate the appropriate firmware by clicking this link
Click on the firmware, then click download.
Agree to the license terms and conditions when prompted.
Locate the downloaded firmware file (this typically will be in the default download folder, unless prompted for a download location, then choose Desktop) and extract it by right-clicking on the file and selecting extract all or unzip. When prompted for an extract location, choose the USB flash drive (typically labeled by letters E, F and so on) to extract the final file to. A file labeled DIGICAP will appear in the USB flash drive.
After the firmware has been extracted (unzipped), remove the USB flash drive from the computer and insert it into one of the available USB ports on the DVR/NVR unit.
On the DVR/NVR, go to the Main Menu, and then go to Maintenance.
From the sub-menus on the left click Upgrade. This will display the content of the USB flash drive.
Choose the DIGICAP file and press Upgrade.
An information window will pop up prompting that the unit will reboot after the upgrade is complete. Click YES.
To verify that the firmware has been upgraded, after the DVR/NVR is rebooted, go to the Main Menu, and then go to System Information. The current firmware version will be displayed.

This is direct from Hikvision's website so this should help you update your firmware

hpathum
Posts: 5
Joined: Thu May 20, 2021 12:29 pm

Re: Cloud storage mode enable

Post by hpathum »

Hi ,
Thank you I will check

hpathum
Posts: 5
Joined: Thu May 20, 2021 12:29 pm

Re: Cloud storage mode enable

Post by hpathum »

Hi,
I just want to know,
Is there a risk if the device is not up after the upgrading.

Post Reply